Component & Stereo audio to HDMI 1080 Installation Guide

Installation Steps

To setup Component & Stereo audio to HDMI 1080 Converter, please follow below steps to install.

  • 1) Power off display and signal sources such as HDTV/Monitor/DVD player etc.;
  • 2) Connect your Component (YPbPr) source to Component input Jacks Y/Pb/Pr by matching the same colors;
  • 3) Connect Stereo Audio source to 3.5mm Audio input Jacks;
  • 4) Connect HDMI cable to the converter at HDMI output Jack;
  • 5) Connect other end of HDMI cable to HDMI input of display;
  • 6) Plug in 5V DC power cord to power DV/5V Jack of the converter;
  • 7) Power on the converter;
  • 8) Power on Component (YPbPr) source and display with HDMI input.
Be Sociable, Share!
Back