DTS/AC-3 to 5.1 Surround Sound System With Earphone Out Installation Guide

Installation Steps

To setup the Digital Audio Decoder (Model: DA-DTS/5.1), please follow the steps below to complete the installation properly.

  • 1) Power off Surround Sound System incl. audio sources and receivers;
  • 2) Connect your audio sources to Optical 1 & Optical 2 Jacks via Toslink-to-Toslink cables; to Coaxial Jack via coaxial cable; and to 3.5mm AUX via audio cable;
  • 3) Insert the three 3.5mm-to-RCA adapters into CEN/SW, FL/FR and SL/SR Jacks;
  • 4) Connect the 6 output Jacks of adapters to your surround speakers, amplifier or receivers;
  • 5) Connect 5V-OUT Jack to your surround sound headset (if applicable);
  • 6) Plug in 5V DC power and power on the converter;
  • 7) Power on audio sources and surround speakers, amplifier or receivers.
Be Sociable, Share!
Back