Dual HDMI to Component & VGA w/SPDIF Audio Installation Guide

Installation Steps

To setup HDMI to Component & VGA w/ SPDIF Audio Converter, please follow below steps to install.

  • 1) Power off display and signal sources such as HDTV/Monitor/DVD player etc.;
  • 2) Connect your HDMI sources to HDMI 1 & HDMI 2 inputs;
  • 3) Connect your audio receivers / amplifiers to S/PDIF Jack or 3.5mm L/R Jack;
  • 4) Plug one end of VGA or Component/YPbPr cable into VGA or Y/Pb/Pr jacks (by matching the same colors);
  • 5) Plug other end of VGA or Component/YPbPr cable to VGA or Component/YPbPr jacks of display;
  • 6) Plug in 5V DC power cord to power DV/5V Jack of the converter;
  • 7) Power on the converter;
  • 8) Power on signal source and display with VGA or component input.

Dual HDMI to Component Installation Guide & VGA w/SPDIF Audio

Be Sociable, Share!
Back