SPDIF (Coaxial w/Optical) to Stereo L/R Installation Guide

Installation Steps

To setup Coosis S/PDIF (Coaxial w/ Optical) to Stereo L/R converter (Model: DA.SPDIF/STEREO), please follow the steps below for proper installation.

  • 1) Configure your audio sources for PCM output, and configure your sound system for PCM input, if necessary;
  • 2) Power off any audio sources and sound systems such as an HDTV / Monitor / DVD player / Amplifier etc.;
  • 3) Connect your audio sources into the input jacks, Coaxial or TOSlink of this converter;
  • 4) Connect your sound system to the L/R output jacks of this converter;
  • 5) Plug in the 5V DC power cord to the DV/5V jack of the converter;
  • 6) Power on DA.SPDIF/STEREO, and then power on audio sources & sound system.

SPDIF (Coaxial w/Optical) to Stereo L/R Installation Guide

Be Sociable, Share!
Back