VGA & Stereo audio to HDMI 1080 Installation Guide

Installation Steps

To setup VGA & Stereo audio to HDMI Converter, please follow the steps listed below for proper installation.

  • 1) Power off the display and display sources such as an HDTV/Monitor/DVD player etc.;
  • 2) Connect your VGA source to the VGA input Jacks;
  • 3) Connect the Stereo Audio source to the 3.5mm Audio input Jack;
  • 4) Connect the HDMI cable to the converter at the HDMI output Jack;
  • 5) Connect the other end of the HDMI cable to the HDMI input of the display;
  • 6) Plug in the 5V DC power cord to the DV/5V Jack of the converter;
  • 7) Power on the converter;
  • 8) Power on the VGA source and display with the HDMI input.
Be Sociable, Share!
Back